Như các báo đã đưa tin về sự unlock thành công chiếc Iphone vào đầu tháng Giêng 2009.
Nhưng cũng chưa có ai đưa đầy đủ trình tự các thao tác của quá trình làm sao unlock Iphone, tôi có chút thời gian, nên gửi cho các bạn tham khảo, chúc may mắn!
Home Testimonials Product Bonuses FAQ Contact Us Members Area Join
- Use any GSM Sim card worldwide
- No loss of features or functionality
- Video Recording
- Enable GPS
- Enable Rss Feed
- Enable instant messengers
- Use Installer.app - Vnc Client iPhone to interact with
remote computers
- Music in your Pocket
- WiFi Connection
- Edge Connection
- Enable MMS messaging
- Compatible with the latest 2.2 firmware
How to Unlock/Jailbreak Your 2.2 3G iPhone Using QuickPwn (Windows)
You Must Complete Steps 1 And 2 Before Launching The QuickPwn Application
These are instructions on how to jailbreak your 3G iPhone to the 2.2 iPhone firmware using QuickPwn for Windows.
Step One
Create a folder called Pwnage on your desktop.
Download the following files and place them in the Pwnage folder you just created:
- QuickPwn 2.2
- 2.2.0 (3G): iPhone1,2_2.2_5G77_Restore.ipsw
Extract the QuickPwn22.zip file to the Pwnage folder.
Step Two
Connect your iPhone to the computer and launch iTunes.
Select your iPhone from the list of devices on the left. Now hold down shift and click the Restore button. Restore is preferred as it won't create any wasted space on your iPhone.
Navigate to the Pwnage folder on your desktop and select the 2.2 firmware ipsw. Click the Open button to continue.
Step Three
Once iTunes has finished updating your iPhone to the 2.2 firmware you may launch QuickPwn.exe from the Pwnage folder on your desktop.
Step Four
Make sure you iPhone is connected to the computer and click the blue arrow to continue.
Step Five
Click the Browse button to locate your iPhone firmware.
Step Six
Select the 2.2 firmware ipsw from the Pwnage folder on your desktop then click the Open button.
Step Seven
QuickPwn will check to make sure the ipsw is valid. Click the blue arrow button to continue.
Step Eight
You can now select whether to Add Cydia, Add Installer, or Replace Boot Logos. Select the ones you would like to perform then click the clue arrow button
Step Nine
QuickPwn will now ask you to confirm your iPhone is connected via USB before continuing. Click the blue arrow button to proceed.
Step Ten
QuickPwn will now automatically put your iPhone into recovery mode. Once its in recovery mode you will be prompted to: Hold the Home button for 5 seconds, Hold the Home and Power buttons for 10 seconds, then release the Power button and continuing holding the Home button until your iPhone is in DFU mode.
Watch the prompts carefully and follow along.
Step Eleven
Once QuickPwn detects your iPhone in DFU mode it will begin the jailbreak process.
Step Twelve
Once jailbreaking is complete QuickPwn will inform you that it was successfull.
Now We Will Unlock Your Jailbreaked 3G 2.2 iPhone
[FOR WINDOWS USERS]
These are instructions on how to software unlock the iPhone 3G for use with any GSM cellphone carrier.
Before you can follow these instructions you must have a jailbroken iPhone and you must be on the 02.28.00 baseband(modem firmware). This means that you must be running the 2.2 firmware. If you used PwnageTool to update to 2.2 from 2.1 you will have to rejailbreak using a QuickPwn jailbreak tutorial for the time being.
No PIN support yet. Well we’re still working out the flow for SIMs with PINs enabled. Please disable any PIN you may have on that SIM before trying yellowsn0w, for now..
Step One
Press to launch Cydia Installer from your SpringBoard.
Step Two
Press to select the Manage tab at the bottom of the screen.
Step Three
Press to select the large Sources button
Step Four
Press the Edit button at the top right of the screen.
Step Five
Press the Add button at the top left of the screen.
Step Six
Enter
http://apt9.yellowsn0w.com/ as the source url and press the Add Source button.
Step Seven
Once the source has been added press the large Return to Cydia button.
Step Eight
Press the Done button at the top right of the screen.
Step Nine
Press to select apt9.yellowsn0w.com from the list of user entered sources.
Step Ten
Press to select yellowsn0w from the list of packages
Step Eleven
Press the Install button at the top right of the screen.
Step Twelve
Press the Confirm button at the top right of the screen.
Step Thirteen
After installation completes successfully press the large Return to Cydia button.
Step Fourteen
Now press the Home button then power off and power on the iPhone. You do this by holding down the power button for 3 seconds then moving the power slider that appears to the right. Press the power button again to turn on the phone.
Step Fifteen
You should now be able to insert the SIM of your choice!
***HINTS: It seems that getting your iPhone to pick up your new carrier can be helped by turning off 3G and perhaps toggling the Airplane Mode switch on and off. If you are still having problems try removing and reinserting the SIM or booting with the new SIM already inside.
***NOTE: There is a known issue with SIM cards that have STK (SIM Toolkit) application menus. These menus are usually items such as “top up” “get credit” “lotto numbers” etc. These menu items confuse the application sometimes. Removing and reinserting the SIM once after reboot (give it about 10 secs after you see the slide to unlock widget) fixes this issue.
***UPDATES:
1. Soon you’ll see yellowsn0w 0.9.1 in the repos. It uses a much longer delay to let your SIM card initialize. If you have problems with 0.9.0, try this one and wait a full minute after you see homescreen, then reinsert sim card.
2. If you are in the U.S. and are trying this with T-Mobile, you must turn off the 3G switch in Settings.
Home Order Now FAQ Reviews Contact Us Members Bonuses Products The easiest Iphone unlocking service since August 2007
© 2008-2009 autoiphoneunlocker.com
Trang Chính 
Latest images 
Đăng ký 
Đăng Nhập 
Tiêu đề: Unlock Iphone. 
Fri Jan 16, 2009 1:51 am
